Cover photo: Kepadalisna / Wikimedia Commons. Original photo ยท CC BY-SA 4.0. Resized and converted for web use.

Repot Triostar when roots fill the pot or the mix has broken down. To make more plants, split a healthy clump into sections that each have roots and several shoots. Keep the crown at its old depth and use a draining pot only a little wider than the roots.

Repotting gives roots space; division makes separate plants. You do not have to do both. A stressed plant with a few brown tips often needs a care check first. Start with the Triostar care profile if you are unsure about its light and water.

Photo: Hardyplants; Wikimedia Commons; CC0. Resized and converted for web use. Source: https://commons.wikimedia.org/wiki/File:Stromanthe_sanguinea_%27Triostar%27.jpg. Licence: http://creativecommons.org/publicdomain/zero/1.0/deed.en

Decide whether a move is needed

Look for roots packed round the pot, roots coming through holes or a root ball that takes up most of the container. Old mix that has become dense or sheds water can also need changing. One root at a drain hole does not mean you must divide the whole plant.

If the mix is wet and roots are failing, that is a health problem, not simple crowding. Check the damaged roots rather than moving a sick plant into an even larger damp pot. The brown-edge and curling-leaf checks help separate root trouble from dry air or sun damage.

Choose warm, mild conditions

Spring active growth is a useful time in many Indian homes. Wait until chilly North Indian nights have passed. In warmer regions, choose a mild period when the plant is growing. Delay optional division during a heatwave or a cold spell.

Get a clean draining pot, fresh airy indoor mix and clean tools ready first. A pot roughly 2โ€“3 cm wider than the root ball is a useful starting size for repotting. Small divisions need small pots; more empty wet mix is not a benefit.

Repot without splitting the clump

  1. Water earlier if the root ball is very dry, so you can handle it without tearing brittle roots. Do not start with a sodden pot.
  2. Slide the plant out while supporting its base. Do not pull it by the leaves.
  3. Loosen only roots or old mix that need attention. Keep a sound root ball largely intact.
  4. Set the plant in the new pot at its previous depth.
  5. Add fresh mix round the sides. Firm it gently without packing it hard.
  6. Water to settle the mix, drain and empty the tray.

If you want to divide it

Look for natural groups of shoots with their own roots. Ease two sound groups apart gently. If a firm joining section needs a cut, use a clean sharp tool and keep fingers clear. Do not rip through the whole root system just to get more pieces.

Each piece should have roots and several shoots. A single leaf with its stalk is not a proper division. Pot each section at the same depth as before and keep all leaf bases clear of buried, soggy mix.

Repotting or dividing?
Your plantBetter choice
Healthy, crowded, but you want one full potRepot the clump whole.
Healthy with clear rooted groups of shootsDivide only if you want separate plants.
Small or weak with few shootsImprove care before optional division.
Wet mix and failing rootsDeal with root damage; avoid a large wet pot.

Care for the roots after the job

Keep the plant in bright filtered light, away from hard sun and direct AC airflow. Give humid air with ventilation. Do not seal a large leafy plant into a hot, dripping wet cover.

Use the Triostar watering check, allowing the top 1โ€“2 cm to start drying while the root ball stays lightly moist. A new pot can dry at a different rate, so do not copy the old schedule without checking.

Hold extra feed while the roots settle. If the fresh mix already contains fertiliser, follow that product information before adding more. Keep the plant steady and check the new growth. There is no fixed date when every division must produce a new leaf.

Sources

Sources checked on 21 November 2026. Care steps are adapted for Indian homes; check the actual light, warmth and moisture around your plant.